COMPACT LINE TRANSFORMERS
The compact line transformators series are 100V line transformers, designed for impedance matching between speakers and amplifiers. They are used for converting low impedance speakers allowing them to be fitted in 100V PA installations where long cable runs can be used. The transformers have an over-dimensioned core, which limits saturation to a minimum and gives remarkable improvement of the sound reproduction quality, especially in the low frequencies.
TOROIDAL LINE TRANSFORMERS
All these transformers are designed to be mounted on the TR3000 installation plate and are supplied with all necessary accessories for mounting. Every transformer has a selection of different tappings available for 50V, 70V and 100V lines and the low impedance side is selectable between 2, 4 an 8 Ohm.
AUDIO ISOLATORS
These stereo ground loop isolators with different connectors are designed as problem solvers to electrically isolate audio devices from each other. Hum in audio systems is usually caused by groundloops in the system. The most common and simple method to solve these problems is an audio isolation transformer such as the TR2000 series.
LINE TRANSFORMER UNITS
These multi-channel speaker line transformers are built in a 19″ form factor and consist of four or eight toroidal line transformers. These units are designed for using standard low impedance power amplifiers in large 100V, 70V or 50V public address audio systems.
